Heatit Z-Dim
Heatit Z-Dim
Heatit Z-Dim is a Z-Wave rotary dimmer for many different types of light sources. The Heatit Z-Dim works on low loads without causing the lights to flicker. It dims LED-bulbs from 1-200VA , 230V halogenand incandescent bulbs, dimable LED-drivers and electronic transformers. L+N leads must be connected.
The dimmer is equipped with a multiway switching option. This allows you to light and dim a light source from one dimmer, and later turn it off with another switch. Very practical for stairwells, long hallways etc.
NB! DIMMING
Lighting management may be challenging, and we recommend checking the compatibility of different light sources/bulbs before installation.
The dimmer fits into standard Gira System 55 frame systems.
Other Details :
- Product : Heatit Z-Dim
- Code : 14 444 44
- Availabiltity : Available
- Series : Heatit
FEATURES
Z-Wave rotary dimmer
Scene Controller
Dims:
LED
230V halogen
Incandescent lightbulbs
Dimable LED-drivers
Electronic transformers
Starts at 1VA and dims up to 200VA LED
Trailing edge
Multiway switching option
Electronic thermal cutoff with automatic reset
Firmware updates (OTA)
Power metering
Supports encryption mode: S0, S2 Authenticated Class,
S2 Unauthenticated Class
This product is a security enabled Z-Wave Plus product with
encryption. The product must be used with a security enabled
Z-Wave Controller in order to fully utilize the product.
TECHNICAL DATA
Protocol Z-Wave, 868,4MHz
Chip Z-Wave 500 chip
SDK 6.71.03
Rated voltage 230V AC 50Hz
Power 1 – 200VA
Input current 0,9A
Controls Push and rotary dimmer
Operating temperature -20°C – 40°C
Connection Max. 2,5mm²
Flush mounting depth 15mm
IP Code IP 20
Size (LxWxH) 84 x 84 x 43mm
Approvals Z-Wave Plus
CE
EN 55015/A2: 2009, EN 61547:2009
EN 61000-3-2/A2:2009
EN 61000-3-3:2008
EN 60669-2-1/A12:2010 EN 60669-1:A2:2008
EMC 2014/30/EU, RoHS 2011/65/EU
LVD 2014/35/EU
-
No Reviews For this product
